HOME   English    

Kumamoto University Repository System >
工学 >
発表論文(工学系) >

 

登録ファイル

ファイル 記述 サイズフォーマット
2007_325_1437-1440.pdf436KbAdobe PDF見る/開く
タイトル :Recycle of Metal-Plating on Plastics by Pulse Arc Discharge
著者 :Nagashima, Takashi
Akiyama, Hidenori
Namihira, Takao
Katsuki, Sunao
刊行年月日 :2007-6
収録雑誌名 :Digest of Technical Papers-IEEE International Pulsed Power Conference
巻 :2007
開始ページ :1437
終了ページ :1440
要約(Abstract) :Metal-plating on plastics has been used in household appliances, cars and others. Metal-plating and plastics have to be separated for recycling. The crush separation system is a high running cost. A melting separation system using an acid or an alkali causes deterioration the performance of plastics. Therefore, a new method separating metal-plating and plastics is expected. A method to separate metal-plating on plastics been developed using pulse arc discharges by pulsed power [1]. A large current flow into a metal thin and then a part of the metal film is vaporized by heating. At the same time, a shock wave occurs and removes metal thin film from the plastics. The plastics and metal removed are recyclable. In this paper, the effects ceramic tubes covered on electrodes, the kind of electrode material, the distance between electrodes and the diameter of electrodes on the removal efficiency are studied.
収録種別 :会議発表論文
出版社(者) :Institute of Electrical and Electronics Engineers
権利(Rights) :(c)2007 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
備考 :16th IEEE International Pulsed Power Conference, Albuquerque, New Mexico, June 17-22, 2007
URI :http://hdl.handle.net/2298/10322
出現コレクション:発表論文(工学系)
このアイテムの引用には次の識別子を使用してください: http://hdl.handle.net/2298/10322

 

熊本大学附属図書館電子情報担当